CNC Repair Tip #11: Yasnac (Yaskawa) Control i-80M Spindle Orientation Adjustment
Attention: Please read the Terms of Use for this site before proceeding.
1. Power control off.
2. Power control on in E-stop condition.
3. Press RUN button, then “setting” soft key.
4. Press the next “setting” soft key, then set PWE to “ON”.
5. Press the MAINT button (pm1000 series parameters will be displayed on the screen).
6. Key in [1] [4] [1] [4] and press CURSOR DOWN arrow key. (This takes you to pm1414).
7. Change value in pm1414 to desired value. (+ counts = M04 direction; – counts = M03 direction)
8. Press RUN button and set PWE to “OFF”.
9. Power control off.
10. Release E-stop button and power control on.
11. Set MDI and command M19; check orientation position and repeat steps 1 thru 10 as needed.
Check out www.pinpointcnc.com for machine repair information, procedures and other products
Go to www.cncalarm.com for machine alarms and details
Go to www.toyookivalve.blogspot.com for information on Toyooki products
Go to Fanuc Control Central for all Fanuc related posts
Filed Under CNC Repair Tips, Yasnac CNC | Leave a Comment
Tagged With cnc service, cnc services, i80, spindle orientation, yaskawa, yasnac