Fanuc CNC Machine Position Display in Metric-How to Change to Inch
Attention: Please read the Terms of Use for this site before proceeding.
Today I had a situation with a Fanuc 31i control. Initially, the issue was that the “work offsets were in metric”. Upon further investigation, it turns out that the machine position display (not the absolute or relative) was in metric. Since the work offsets [...]
Stopping Axis Feed on Fanuc Controls: Using RFO Parameter
Every now and then, I come across a machine that does not respond this way. The feedrate over-ride switch is set to 0%, but the axis will continue to move at a slow speed. I’m not sure why anyone would want this to be the case.
keep looking »